Method for measuring bone density through the electrical conductivity calculated by Electrical Impedance Tomography

Authors

  • M. A. San-Pablo-Juárez Instituto Politécnico Nacional. Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada unidad Querétaro, Querétaro, México
  • E. Morales-Sánchez Instituto Politécnico Nacional. Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada unidad Querétaro, Querétaro, México
  • F. Ireta-Moreno Universidad de Guanajuato. División de Ingenierías campus Irapuato-Salamanca, Guanajuato, México
  • R. Ávalos-Zúñiga Instituto Politécnico Nacional. Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada unidad Querétaro, Querétaro, México
  • J. J. González-Barbosa Instituto Politécnico Nacional. Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada unidad Querétaro, Querétaro, México

DOI:

https://doi.org/10.17488/RMIB.38.2.5

Keywords:

Bone density, electrical conductivity, Electrical Impedance Tomography, Sheffield Backprojection

Abstract

In this paper a method to measure bone density was developed. The method consists in the measurement of electrical conductivity of bone by Electrical Impedance Tomography (EIT). A phantom with simulated data of bone is used, applying currents and recording voltages; then a backprojection reconstruction is used to generate maps with graphic conductivity values. The data obtained were analyzed and was obtained a distribution of electrical conductivity of bone, wich varies according to the bone porosity level in each region. A significant advantage of using this method is that is possible to measure electrical conductivity in several directions of the bone, obtaining an effective conductivity. Therefore it is possible to determine the porosity in the bone with measurements of electrical conductivity using the proposed EIT method, this allows to calculate a numerical value for bone density

Downloads

Download data is not yet available.

Published

2017-05-14

How to Cite

San-Pablo-Juárez, M. A., Morales-Sánchez, E., Ireta-Moreno, F., Ávalos-Zúñiga, R., & González-Barbosa, J. J. (2017). Method for measuring bone density through the electrical conductivity calculated by Electrical Impedance Tomography. Revista Mexicana De Ingenieria Biomedica, 38(2), 492–506. https://doi.org/10.17488/RMIB.38.2.5

Issue

Section

Research Articles

Dimensions Citation

Similar Articles

You may also start an advanced similarity search for this article.